Database Change Events; Log Events; Inventory Events - Nortel NTRN10AN Planning Manual

2-174 Operation, administration, and maintenance (OAM) features

Database change events

Database change events (DBCHG events) result only in the case of
successfully completed commands. DBCHG events include the following
information:
•
•
•
•
•
•
•

Log events

Log events result after either of the following occurs:
•
•
Log events include the following information:
•
•
•
•
•
•
•
•
•
•

Inventory events

Inventory events are generated and displayed when inventory changes (for
example, pulling or inserting circuit packs) occur.
OPTera Metro 3500 Multiservice Platform
User ID of the person who entered the command (alphanumeric string up
to 20 characters in length)
Command identifier (for example, ENT-CRS-VT1)
AID(s) that were acted upon (if applicable)
CTAG
Position defined parameters from the command
Keyword defined parameters from the command
Primary and secondary states from the command
a TL1 command is unsuccessful (TL1 return code is not COMPLD)
a TL1 command is attempted, regardless of success or failure, with an
account of UPC 4 or higher
Note: Retrieval command (RTRV) from a UPC account of 3 or lower does
not result in a log event
User ID of the person who entered the command (alphanumeric string up
to 20 characters in length)
Priority
Status of the command
Command identifier (for example, ENT-CRS-VT1)
AID(s) that were acted upon (if applicable)
CTAG
Position defined parameters from the command
Keyword defined parameters from the command
Primary and secondary state parameters from the command
Failure string
NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004