Bandwidth Management - Nortel NTRN10AN Planning Manual

2-84 Operation, administration, and maintenance (OAM) features
Figure 2-37
Egress WAN port and service alarms
Far end client Rx signal fail
client service mismatch

Bandwidth management

The 2xGigE/FC-P2P circuit pack supports both contiguous and virtual
concatenation bandwidth provisioning.
Contiguous concatenation
When the VCAT attribute in the WAN port is set to DISABLE, only one
connection (STS-1, STS-3c, STS-12c or STS-24c) can be cross connected to a
2xGigE/FC-P2P WAN port.
OPTera Metro 3500 Multiservice Platform
LAN
LAN
Rx excessive error ratio
Rx signal degrade
Rx loss of frame delineation
insufficent link capacity
link down
— SONET contiguous (STS-1, STS-3c, STS-12c and STS24c)
NTRN10AN
WAN
GFP VCAT
Rel 12.1 Standard Iss 1 Apr 2004
STS Path
STS Rx loss of sequence
STS Rx loss of multiframe
STS Rx loss of alignment
STS Path
STS Path
STS Path
STS Path
STS Path
STS Rx signal label mismatch
STS Rx unequipped
STS Rx signal degrade
STS Rx AIS
STS Rx RFI
STS Rx excessive BIP error rate
STS Rx loss of pointer
STS Rx path trace mismatch
EX1494p