Physical Pms - Nortel NTRN10AN Planning Manual

Table 2-25
messages.
Table 2-25
Termination characters supported in the RTRV-PM response message
Termination
character
semi-colon (;)
greater than (>) If the current response does not include PM data (in a response

Physical PMs

The physical PMs feature measures the received optical power on various
OC-48 and OC-192 circuit packs. See
circuit packs supporting receive optical power measurement.
Table 2-26
OC-48 and OC-192 circuit packs supporting receive optical power
Description
OC-48 STS SR circuit pack
OC-48 STS IR circuit pack
OC-48 STS LR circuit pack
OC-48 ELR interface circuit (1550nm)
OC-48 ER DWDM circuit pack (1535.04nm)
OC-48 ER DWDM circuit pack (1555.75nm)
OC-48 ER DWDM circuit pack (1528.77nm)
OC-48 ER DWDM circuit pack (1533.47nm)
OC-48 ER DWDM circuit pack (1530.33nm)
OC-48 ER DWDM circuit pack (1531.90nm)
OC-48 ER DWDM circuit pack (1552.52nm)
OC-48 ER DWDM circuit pack (1550.92nm)
Planning and Ordering Guide—Part 1 of 2 NTRN10AN
Operation, administration, and maintenance (OAM) features 2-111
describes the termination characters for the RTRV-PM response
Description
Indicates the termination of the response. All PM data has been
reported and the process is complete.
block), then the termination character indicates that the current
response is a continuation message. PM data will be reported in
subsequent response messages.
If the current response includes PM data, then the termination
character indicates that this response contains partial data.
Additional PM data will be reported in subsequent response
messages.
Table 2-26 on page 2-111
PEC
NTN440HA
NTN440KA
NTN440LA
NTN440FA
NTN408AS
NTN408CW
NTN408AA
NTN408AN
NTN408AE
NTN408AJ
NTN408CN
NTN408CJ
Rel 12.1 Standard Iss 1 Apr 2004
for list of