Site Manager Support; Preside Software Upgrade Management Support - Nortel NTRN10AN Planning Manual

2-116 Operation, administration, and maintenance (OAM) features
•
the equipment or facility that a summary alarm is raised against is removed
without first deleting the equipment of facility.

Site Manager support

Site Manager Release 6.0.1 is used to operate, administer, maintain, and
provision network elements at a nodal level. For more information, refer to the
Site Manager Planning and Installation Guide, NTNM35FA.
Site Manager incorporates data applications, which manages OPE
provisioning, and the TL1 Command Builder.
When you log in to Site Manager, the main window is displayed. See
2-41 on page

Preside Software Upgrade Management support

The purpose of Preside Software Upgrade Management (PSUM) is to deliver
new software to the processors of one or more network elements (NE), and to
upgrade the circuit pack cards on these network elements.
Preside SUM is a network-level application installed on the Preside
Applications Platform. Preside SUM provides fast, simple, and reliable
software upgrade deployment across a network, from a single location.
Preside SUM Release 3.0 supports the upgrade of OPTera Metro 3500 network
elements controlled by a network processor (NP).
For more information on Preside Software Upgrade Management capability,
refer Preside Software Upgrade Management Release 3.0 documentation
(NTNM26DA).
OPTera Metro 3500 Multiservice Platform
TCA summary alarms will not clear if;
— the equipment or facility that a summary alarm is raised against is put
out-of-service (OOS).
2-117.
NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004
Figure