10/100-Base-T Ethernet Port Connection; Flash Memory Simm Installation; Figure 3-7 P27A - Upper Rs-232 Serial Port Connector; Figure 3-8 P27B - Lower Rs-232 Serial Port Connector - Motorola MSC8101 ADS User Manual

FIGURE 3-7 P27A - Upper RS-232 Serial Port Connector

FIGURE 3-8 P27B - Lower RS-232 Serial Port Connector

3•8

10/100-Base-T Ethernet Port Connection

The 10/100-Base-T port connector - P12, is an 8-pin, 90
nection between the 10/100-Base-T port to the network is done by a standard cable, having two
RJ45/8 jacks on its ends.
3•9

Flash Memory SIMM Installation

To install a memory SIMM, it should be taken out of its package, put diagonally in its socket - U8
and then raised to a vertical position until the metal lock clips are locked. See
Memory SIMM Insertion" on page
24
Freescale Semiconductor, Inc.
Installation Instructions
CD
1
TX 2
RX 3
DTR 4
5
GND
N.C.
1
TX 2
RX 3
N.C. 4
5
GND
25.
MSC8101ADS RevB User's Manual
For More Information On This Product,
Go to: www.freescale.com
6 DSR
7 N.C.
8 CTS
9 N.C.
6 N.C.
7 N.C.
8 N.C.
9 N.C.
o
, receptacle RJ45 connector. The con-
FIGURE 3-9 "Flash
MOTOROLA