Storage - Beem Café Joy V2 User Manual

EN
thoroughly under running water.
Push the drip-stop (19) several times
while rinsing.
Espresso machine
The intervals between descaling depend
on the water hardness (in the case of
hard water every 80 brews; and soft water
every 150 brews).
Fill the water tank with water up to the
"Max." mark and add citric acid or vin-
egar essence (approx. 5% acid).
NOTE
If you use a commercially available
descaling agent, observe the manu-
facturer's instructions for use.
Place a fairly large receptacle under
the holder holder.
Press / (31).
Turn the function selection switch
(5) to the position and allow the
descaling solution to run through the
appliance.
NOTE
If the appliance is severely scaled,
it may be necessary to repeat the
descaling process.
Rinse out the water tank thoroughly
run through the appliance.
Wash all removable parts with warm
water and detergent before preparing
espresso again.
BEEM - Elements of Lifestyle
Care of stainless steel parts
We recommend using INOX-METAL-
POLISH from Beem for regular mainte-
from stainless steel surfaces. The polish
restores appliances to their original shine.
INOX-METAL-POLISH is available in
tubes and is suitable for pots as well as
for other objects made of stainless steel,
chromium, brass, copper, aluminium, sil-
ver and also hard plastics. INOX-METAL-
POLISH is used in factories for polishing
stainless steel. You can obtain INOX-
METAL-POLISH from your retailer or by
phoning us or visiting our website at www.
beem.de .
If you do not intend to use the appliance
for a longer period of time, clean it as de-
scribed in the section Cleaning and care
(page 38).
Empty the water tank.
Store the appliance and all accessory
parts at a dry, clean and frost-free loca-
tion, which is protected against direct
sunlight.
-
Café Joy V2

Storage

41