Beem Café Joy V2 User Manual page 38

EN
Espresso machine
General instructions
After heating up the appliance, allow
hot water to run through the strainer
insert and holder.
Preheat your cups on the hot plate.
Rinse out cold cups with hot water to
preheat them before use.
To preheat, leave the empty, cleaned
strainer holder with strainer insert in
the warmed-up appliance.
If possible, use freshly ground coffee
powder to develop optimum taste.
Try out different degrees of grinding
the aroma and the cream of the es-
presso.
Only press down the coffee powder
lightly. If the coffee powder is pressed
and the percolation time increases.
Fill the water tank with fresh water.
Empty and clean the strainer insert
after each use.
Clean and descale the appliance at
regular intervals. A dirty and/or scaled
appliance impairs the aroma.
BEEM - Elements of Lifestyle
Installing the strainer insert
NOTE
make a cup of espresso (image B1).
Select the deep strainer insert (13b)
to make two cups of espresso at the
same time or for a double espresso.
Turn the nib on the side of the strainer
insert (13) towards the handle (11)
and insert the strainer (12) into the
holder (image B 2).
After inserting, turn the strainer (13)
nib prevents the strainer insert from
falling out.
Removing the strainer insert
After using, empty the strainer insert
(13) as described in the section Emp-
tying/cleaning the strainer insert
(page 39).
Turn the strainer insert (13) so that
the nib on the wall of the strainer
insert is pointing towards the handle
and lift the strainer insert (13) out of
the holder (12).
Café Joy V2
33