28 Postinstallation
Step
1
2
3
MCG 3100 parameter configuration
You must configure the MCG 3100 parameters to communicate with the
following network elements:
•
•
•
Use the Configuration window buttons for the following tasks:
•
•
•
•
Procedure 3
Configuring the MCG 3100 parameters
Nortel Mobile Communication Gateway 3100 Installation and Upgrades
Copyright © 2007, 2008 Nortel Networks
.
Action
In a Web browser address bar, enter one of the following
addresses:
http://<hostname>:8282/adminserver
OR
https://<hostname>:8553/adminserver/
where
<hostname> is the domain name of the server.
At the Web Console log on screen, enter the following default
username and password:
•
Username: admin
•
Password: password
The username and password are case sensitive.
ATTENTION
Nortel recommends that you change the default password.
Click Sign In.
Enterprise Communications Server (ECS)
Backup MCG 3100 (if installed)
Lightweight Directory Access Protocol (LDAP) Server
Unlock—unlocks the configuration parameters to enable them to be
updated.
Lock—locks the configuration parameter fields.
Save—saves updates and prompts you to restart the server.
Load current values—restores the current server values to the
parameter fields.
Nortel Mobile Communication 3100 Series Portfolio
NN42030-300 02.03 Standard
--End--
9 May 2008