Other Call Features; Use Call Page Connect To Make An Announcement; Use Centrex/Exchange Switchhook Flash - Nortel 6120 User Manual

Other call features

This section describes some of the call features available on your WLAN Handsets
6120 and 6140.

Use Call Page Connect to make an announcement

Use the Call Page Connect feature to make an announcement over a paging system.
Note: A Page key on an attendant console overrides and disconnects the telephones.
The telephones must reaccess the Page trunk.
To connect to Call Page:
To disconnect Call Page:

Use Centrex/Exchange Switchhook Flash

Use the Centrex/Exchange Switchhook Flash feature during an established call to use
a Centrex service, such as Call Transfer or Three-Way Calling.
To use Centrex/Exchange Line
Switchhook Flash:
1. While the handset is in standby mode,
enter the Page Trunk Access Code
complete the connection to the page
system.
2. Make your announcement.
3. Press the End
1. While in a call, press the
access the Feature Keys menu.
2. Press the number that corresponds to the
Centrex Switchhook Flash
A special dial tone sounds.
3. Enter the codes for your custom
Centrex feature.
4. Press the End
Other call features
button.
Line button to
feature.
button.
to
93