Using The Single Desktop Charger; Cleaning The Desktop Charger - Nortel 6120 User Manual

Using the Single desktop charger

To charge the WLAN Handset 6120
and 6140

Cleaning the Desktop Charger

Clean the Desktop Charger by wiping the surface with a plain-water-dampened cloth
or paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
CAUTION
Do not immerse the charger in water or any other liquid.
Do not pour liquids into the charger slot.
You can clean the battery pack contacts on the handset with isopropyl (rubbing)
alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the
1. Press End to terminate any calls.
The handset can be off or in standby
state during charging.
2. Place the handset, face forward, into the
Desktop Charger.
An animated charge icon indicates that
charging is in progress.
3. Charge the battery pack.
If the handset is in standby mode, it
displays its extension number and
. It is fully operational and can
Charging
receive calls. If the handset is off, only
Charging is displayed and the handset
cannot receive calls.
It is normal for the battery pack to
become warm when charging.
4. When the handset is fully charged,
Charge Complete is displayed.
Remove the handset from the charger.
Desktop Chargers
109