Use Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call from any
telephone or handset. Using Call Park does not tie up a line and, when configured
network-wide, you can use it across networks. You can configure a
to automatically park most calls.
Extension
To park a call on the System Park DN
or your own DN:
To park a call on a DN other than the
System Park DN or your own DN:
Record a Calling Party Number
Use the Calling Party Number feature to record a caller's number or to charge a call to
an account number for accounting purposes during an established call.
To record a caller's number for
accounting purposes:
During an active call, select the
key.
By default, the call is parked on your DN
unless a
System Park
automatically park calls on the system.
1.
Select the
Park
2.
Enter the DN where you want to park
the call.
3.
Select the
Park
1.
Press the
Call Party
the caller on hold. The entered number
displays.
While on an active call
System Park
Park
is enabled to
soft key.
soft key again.
soft key to place
soft
77