Call features
Call features
You can use your handset to make and receive calls. You can also use
the handset to change the call settings.
Make a call
This section describes the features associated with making a call. You
can make a call from your DECT 4027 and 4070 Handsets using any of
the following methods:
•
"Dialling a number" (page 50)
•
"Using Predial mode" (page 51)
•
"Using Speed dial" (page 52)
•
"Using Loudspeaker" (page 52)
•
"Using the telephone book to dial a number" (page 53)
•
"Using the Central Directory to dial a number" (page 53)
•
"Making an SOS call" (page 55)
Attention: During a call, the display light switches off to prevent a rapid
battery discharge. Press the
Dialling a number
To dial a number, perform the following steps:
R
50
1. Press the
Call
2. Use the
Dialpad
You can add additional digits to the number you
dial. For example, in some offices you must add a
digit at the beginning of the number to place a call
to an outside line.
OK
key to highlight the display.
key.
to enter the phone number.