This number is used to identify the handset. It is displayed when the handset is in the
standby state.
The Extension option is for display purposes. You cannot edit this option.
To view the Extension
Setting up Push-to-talk
Note: The Push-to-talk feature is only available on the WLAN 6140 Handset.
Push-to-talk (PTT) mode enables two-way radio communication with another handset
user. You can configure PTT by using the following:
• Channel — selects the channel to be used.
• Enable/Disable — enable or disable Push-to-talk.
• Audio Volume — set the audio volume when using Push-to-talk.
• Tone Volume — set the volume of the tone played for Push-to-talk.
To set up a Push-to-talk channel
1.
While the handset is in standby state,
press the
Cfg
soft key.
2.
Use the
Nav
keys to scroll through the
menu and highlight Extension.
3.
Press
Enter
to select the option.
4.
Do one of the following:
•
Press
Exit
menu and choose another option.
•
Press the
End
menus and return to the standby
state.
1.
While the handset is in the standby state,
press the
Cfg
soft key.
2.
Use the
Nav
keys to scroll through the
menu and highlight Push-to-talk.
3.
Press
Enter
to select the option. The
next menu level is displayed.
Handset display
to return to the previous
button to exit all
63