Assembly Step - Horizon Fitness OMEGA 2 Owner's Manual

ASSEMBLY STEP 1

HARDWARE foR STEP 1 :
Omega 3
BOLT (A)
Shown
M8 x 53L
Qty: 4
1
2
LEFT CONSOLE MAST
6
A Cut the yellow banding straps and lift the running
deck upward to remove all contents from underneath
the running deck.
B Open HARDWARE BAG 1
C Pull up the left and right CONSOLE MAST by lifting
the handrails at both sides.
D Tighten the LEFT & RIGHT CONSOLE MAST using
4 BOLTS (A).
E Tighten the PREINSTALLED BOLTS
CAUTIoN
To avoid unexpected accidents, always assemble the
treadmill with an assistant. Please follow the assembly
RIGHT
steps to avoid injury.
CONSOLE
MAST
NOTE: Make sure the bolts are fully tightened
before go to next step.
BOLT (A)
ASSEMBLY STEP 2
HARDWARE foR STEP 2 :
FIXING KNOB
M8
Qty: 2
.
LEFT HANDLEBAR
FIXING KNOB
A Open HARDWARE BAG 2.
B Put down LEFT & RIGHT HANDLEBAR and fix it into
horizontal position using 2 FIXING KNOBS.
NOTE: Make sure the knob is fully tightened before
go to next step.
RIGHT HANDLEBAR
FIXING KNOB
Omega 3
Shown
7