Assembly Step - Horizon Fitness AT 7.0 Owner's Manual

ASSEMBLY STEP 1

HARDWARE FOR STEP 1
PART TYPE
A UPRIGHT GUIDE BOLT
B BOLT
C FLAT WASHER
D SPRING WASHER
2
2
4
C
D
B
A
DESCRIPTION QTY
M8X1.25PX11L-D10X18.5L 2
M8X1.25PX80L-20L 8
Ø8.2XØ15.0X1.2T
8
Ø8.0XØ13.0X1.5T
8
11
3
B
D
C
A
1
1.1 Open HARDWARE FOR STEP 1.
1.2 Insert UPRIGHT GUIDE BOLT (A) into MAIN FRAME
BRACKET (1) and fully tighten.
1.3 Attach LEAD WIRE to bottom end of CONSOLE
CABLE (2). Pull LEAD WIRE through RIGHT CONSOLE
MAST (3). After pulling the wire through the mast, the
top of the CONSOLE CABLE (2) should be located at
the ATTACHMENT BRACKET (11).
1.4 Attach RIGHT CONSOLE MAST (3) to MAIN FRAME
BRACKET (1) using 4 BOLTS (B), 4 SPRING WASHERS
(D) and 4 FLAT WASHERS (C).
1.5 Repeat STEP 1.4 on the LEFT SIDE.
NOTE: Be careful not to pinch the console cable
while attaching the right console mast.
NOTE: Do not fully tighten bolts until end of STEP
2.
A B
11
C D