Technical Data; Machine Features - Festool TSC 55 REB Original Operating Manual

TSC 55 REB
GB
– When sawing panels, they must be lubricated
with petroleum but thin-walled profiles (up to 3
mm) can be sawed without lubrication.
2.5 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Sound pressure level
Noise level
Measuring uncertainty allow-
ance
CAUTION
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level (3 directions)
Sawing wood
Sawing metal
Uncertainty
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3

Technical data

Cordless plunge-cut saw
Motor voltage
Speed (idle) 1 x 18 V
Speed (idle) 2 x 18 V
Inclination
Cutting depth at 0°
Cutting depth at 45°
Saw blade dimensions
Weight without battery pack
20
L = 88,5 dB(A)
PA
L = 99,5 dB(A)
WA
K = 3 dB
(vector sum for three
h
a < 2,5 m/s
h
a = 2,8 m/s
h
K = 1,5 m/s
TSC 55 REB
14.4 - 2 x 18 V
2650 - 3800 rpm
2650 - 5200 rpm
-1° to 47°
0 - 55 mm
0 - 43 mm
160 x 2,2 x 20 mm
3,9 kg
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging, inter-
mittent (NiCd, NiMH)
Charging times for BP, BPS and BPC battery
packs
Li-ion 1.5 Ah, 80 %/100 %
Li-ion 3.0 Ah, 80 %/100 %
Li-ion 4.2 Ah, 80 %/100 %
Permitted operating tempera-
ture range
Temperature monitoring
Safety class
Battery pack
2
Voltage
2
Capacity
2
Weight
4

Machine features

[1-1] Handles
[1-2] Rotary knobs for angle adjustment
[1-3] Angle scale
[1-4] Lever for changing blades
[1-5] Switch-on lock
[1-6] On/Off switch
[1-7] Extractor connector
[1-8] Release buttons for undercuts
-1° to 47°
[1-9] Adjustable jaws
[1-10] Speed control
[1-11] Battery packs
[1-12] Capacity display
[1-13] Split scale for cutting depth stop (with/
without guide rail)
[1-14] Cutting depth adjusting screw for resharp-
ened saw blades
[1-15] Cutting depth stop
[1-16] Cut indicator
TCL 3
230 - 240 V ~
50/60 Hz
10.8 - 18 V=
max. 3 A
approx. 0.06 A
approx. 25/35
min.
approx. 55/70
min.
approx. 70/90
min.
-5 °C to + 45 °C
via NTC resistor
/ II
BPC 18 4,2 Ah LiIon
18 V
4,2 Ah
0,68 kg