Intended Use; Technical Data - Festool TS 60 KEBQ Original Instructions Manual

Use appropriate detection devices to look
–
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
2.5 Sawing aluminium
When sawing aluminium, the following meas­
ures must be taken for safety reasons:
– Wear protective goggles.
– Regularly clean dust deposits from the mo­
tor housing on the power tool.
– Use an aluminium saw blade.
– Close the viewing window/chip guard.
– Install an upstream residual-current circuit
breaker (RCD, PRCD).
– When sawing panels, they must be lubrica­
ted with petroleum, but thin-walled profiles
(up to 3 mm) can be sawed without lubrica­
tion.
2.6 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing wood
Sawing metal
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
L = 91 dB(A)
PA
L = 102 dB(A)
WA
K = 3 dB
(vector sum for
h
a < 2.5 m/s 2
h
K = 1.5 m/s 2
a < 2.5 m/s 2
h
K = 1.5 m/s 2
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

Plunge-cut saws are designed for sawing wood,
materials similar to wood, gypsum and cement-
bonded fibre materials and plastics.
When fitted with the special saw blades offered
by Festool, the machines can also be used for
sawing unhardened ferrous metal and non-fer­
rous metal.
Materials containing asbestos must NOT be
processed.
Do not use cutting or abrasive wheels.
The user is liable for improper or non-in­
tended use.
3.1 Saw blades
Only use saw blades with the following dimen­
sions:
– Saw blades according to EN 847-1
– Saw blade diameter 168 mm
– Cutting width 1.8 mm
– Locating bore 20 mm
– Standard blade thickness 1.2 mm
– Suitable for speeds of up to 9500 rpm
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
4

Technical data

Circular saw
Removable mains
power cable (plug-
it)
Power
Speed
Max. speed (no-
load)
English
TS 60 KEBQ TS 60 KEB
✓ ✕
1.500 W
3.000 ‑ 6.800 rpm
6.800 rpm
23