Stadler Form Baker One Manual page 16

11. Loaf Is Ready
The breadmaker will beep 3 times to indicate that the baking process has
finished. The clock will also show 00.00 as it has counted down to the end
of the programme and the breadmaker automatically keeps the bread warm.
12. Keep Warm
The clock counts up in minutes to show how long the finished loaf has been
kept warm for. This is to a maximum of 60 minutes. To stop keep warm,
press the 'red cross' button.
Internal Light
The light symbol is on the same button as the '+' (21). You can press this but-
ton during any part of the baking process and it will stay on for 20 seconds.
Pause Button
Throughout the baking cycle, if you want to make minor adjustments to the
ingredients, you can pause the baking cycle up until 'Knead 2'. To do this,
press the 'Go back/Cancel/Pause' button (20). The baking process can then
be resumed by pressing the 'Accept/Start' button (23). Please note that the
process will continue automatically after approximately 5 minutes if the
pause function is not cancelled manually.
Beeper
The Beeper sounds when::
• pressing any button
• the fruit and nut dispenser is released
• the programme starts
• the programme finishes
• 'keep warm' finishes
Stop
The 'stop' function is on the 'Go back/Cancel/Pause' button (20) and should
be pressed for 3 seconds to stop the baking cycle at any time.
Power Interruption
After a brief power supply failure:
If the programme has not yet reached rise 1 and the power failure was only
for a few seconds, when the power supply is re-established, the programme
will automatically continue. If the power failure is longer, the process can be
restarted by pressing the 'Accept/Start' button (23).
If the programme has gone beyond this point, the process must be started
again from the beginning. The ingredients will have to be discarded and you
must start again with fresh ingredients.
Homemade Programmes
There are 2 homemade programmes (No.16 & No.17) which allow you to
adapt an existing baking programme to your own specific requirements.
For example you may want to follow the wholemeal programme (No. 2) but
prefer a denser texture. You can achieve this by using the Homemade pro-
grammes. You have the opportunity to change the timings of each stage of
the process from between zero minutes to 2 hours depending on the stage.
Note, when zero minutes are selected, that stage of the cycle will not be
part of the baking programme.
1. Knead
When you scroll to programme 16 or 17 the 'knead 1' symbol automatically
flashes on screen with 10 minutes showing on the clock. The knead 1 cycle
length can be increased or decreased to between 6-14 minutes by pressing
'+' or '-' (21), (22). Confirm the length of the 1st knead cycle by pressing the
green tick button (23) and the Rise 1 symbol will start flashing.
1. Rise
20 minutes appears on the clock as the default time for this stage of the
process. The Rise 1 cycle length can be increased or decreased to between
20-60 minutes by pressing '+' or '-' (21), (22). Confirm the time you want
by pressing the green tick button and the Knead 2 symbol will flash on the
screen.
2. Knead
15 minutes appears on the clock as the default time for this stage of the
process. The length of the 2nd knead cycle can be increased or decreased to
between 5-20 minutes by pressing '+' or '-' (21), (22). Confirm the length of
the 2nd knead cycle by pressing the green tick button and the Rise 2 symbol
will flash on the screen.
2. Rise
25 minutes appears on the clock as the default time for this stage of the
process. The length of the 2nd Rise cycle can be increased or decreased to
between 5 – 120 minutes by pressing '+' or '-' (21), (22). Confirm the time
you want by pressing the green tick button and the Rise 3 symbol will flash
on the screen.
3. Rise
45 minutes appears on the clock as the default time for this stage of the
process. The length of the 3rd Rise cycle can be increased or decreased by
between 2 – 120 minutes by pressing '+' or '-' (21), (22). Confirm the time
you want by pressing the green tick button and the Bake symbol will flash
on the screen.
Bake
35 minutes appears on the clock as the default time for this stage of the pro-
cess. The length of the Baking cycle can be increased or decreased between
0 –1 hour and 20 minutes by pressing '+' or '-' (21), (22). Confirm the time you