[System]
*1 When Camera Select is set to "Off, " you cannot select this item.
*2 You can select this item only when Camera Select is "Front" or "Rear. "
*3 You can select this item only when Camera Select is "Rear. "
*4 You can make this setting only when the optional CAN Interface box is
connected.
*5 Set this setting after closing the Alpine TuneIt App.
1
2
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
[ ]
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see "About Basic Operation for List
Screen" (page 17).
[ ] [ ] [ ] [ ]
Camera Setup
[Camera]
Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Front / Rear / Other
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
Setting item:
Guide Adjustment
1
[Guide Adjustment]
2
[Back] [Panorama] [Corner]
• [Back] will not appear for the Front camera.
• For an explanation of video patterns, see the camera Owner's Manual.
[Top]
45
-EN