Planning A Multipoint Route - Alpine X701D/INE-W997D Owner's Manual

If you already have a planned route, tap
Tip!
4. Tap
5. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap
route parameters, or tap

3.1.8 Planning a Multipoint Route

To build your route destination-by-destination, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is
normally the current GPS position.
4. Tap
to add the selected location to your route.
to select the cursor as the destination.
to start your journey.
to select the destination.
38
and
to modify the