Searching By Name - Alpine X701D/INE-W997D Owner's Manual


The length of the necessary detour.
Tap
To filter the list of results by providers, tap
right side of the screen.
8. Browse the list and tap one of the list items. A full screen map appears with the
selected point in the middle.
9. The process continues the same way as in case of any other search for Places. See
page 29.

3.1.3.3 Searching by name

To search for a Place by name, browse the various Place categories, or use the mixture of
the two search types, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap and
3. Select the area around which you would like to search for the Place. By default, the
search area is around the current position (or if it is not available, around the last
known position). In this case, the result list is ordered by the distance from this
position. Tap

Tap
result list is ordered by the distance from the centre of the selected town.)

Tap
planned route. (The result list is ordered by the distance from the destination.)

Tap
given position. This is useful when you search for a later stopover that results in
a minimal detour only, such as searching for upcoming petrol stations or
restaurants. (The result list is ordered by the length of the necessary detour.)
to reorder the list.
.
to select one of the following search areas:
to search for a place within a selected town. (The
to search for a place around the destination of the
to search along the planned route, and not around a
32
and then the provider logo on the