Answering A Call - Alpine X701D/INE-W997D Owner's Manual

Answering a Call

Incoming calls are announced by the received call ring tone and a
displayed message (PHONE No., etc.).
1
An incoming call triggers the ringtone and an incoming
call display.
Incoming call notification screen
2
Touch incoming call notification screen.
The call starts.
Call info area
• During a call, the audio for the current mode on the unit is muted. After
calling, playback will resume.
• When the caller's number is transmitted to the system, if the caller's
name is stored in the phone book, the name is displayed. If the name is
not stored, the number is displayed. When neither the name or the
number is unavailable, "Unknown" is displayed.
• Touch [ ] (Decline) to reject an incoming call.
• By touching the call info area during phone call, you can change to the
Phone Operation screen and adjust the speech volume, etc. For details,
see "Operations During a Conversation" (page 77).
• Touch [ ] during a conversation to hide the call info area. To display it
again, Touch or swipe downward on [
the screen.
Hanging up the Telephone
1
Touch [ ] (End Call).
The call finishes.
74
-EN
Call Waiting Function
If a call comes in from another phone during a call, a notice is displayed
on the screen. This function can only be used if the connected mobile
phone has a call waiting function service included.
Second incoming call during a conversation in the call info
area
By touching the second incoming call notification screen, you can put
the current call on hold and answer the second call.
• To switch a party, touch the on-hold screen.
• To finish a call, touch [
] on the upper part of
Second incoming call notification screen
On-hold screen
] (End Call).