Regional; Display - Alpine X701D/INE-W997D Owner's Manual

4.3.5 Regional

You can modify the following settings:
Button

4.3.6 Display

You can modify the following settings:
Button
It displays the current written language of the user interface. Tap it to
select a new language from the list of available languages. The
application restarts after you change this setting and confirm it.
It shows the current voice guidance profile. Tap it to select a new profile
from the list of available languages and speakers. Tap any of these to
hear a sample voice prompt. Just tap
the new spoken language.
Different voice profiles are capable of different levels of service:

Natural Voice (street names not announced): These pre-
recorded sounds can only tell you basic information about turns
and distances.

TTS Voice (street names announced): These computed voices
can read out complex instructions, street names or system
messages.

TTS Voice with a microphone icon: Besides the above-
mentioned profiles, it can also be used for voice recognition.
You can set the measurement units and time/date format to be used.
Alpine Navigation System may not support all the listed units in some
voice guidance languages.
By default, the time zone is taken from the map information and
adjusted by your current location. Here you can manually set the time
zone and the daylight saving time.
When animation is turned on, buttons on menus and keyboard screens,
and screen transitions are animated.
Select the style and colours of the application used in daytime mode.
Select the style and colours of the application used in night mode. It is
recommended to use darker colours at night to avoid distraction during
driving in the dark.
Description
when you have selected
Function