Selecting A Location On The Map - Alpine X701D/INE-W997D Owner's Manual

(optional) If necessary, tap
the coordinate in UTM format.
Tip!
4. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap
route parameters, or tap

3.1.7 Selecting a location on the map

To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
2. Tap the location that you want to select as your destination. The cursor (
appears there.
3. (optional) If needed, tap
or to save this location.
then
to start your journey.
to list the Places near the selected point
and enter
to modify the
)