Route Preferences; Vehicle Profile - Alpine X701D/INE-W997D Owner's Manual

Modify the basic software parameters set during the initial set-up process. See page
6.
Create or use your own user profile for navigating, to be able to use your own
settings.
Delete all saved data and reset all settings to their factory defaults.

4.3.1 Route preferences

The following settings determine how routes are calculated:
Button

4.3.1.1 Vehicle profile

You can select the following vehicle types:
Button
Set the type of vehicle you want to use to navigate the route. Based on
this setting, some of the road types can be excluded from the route, or
some of the restrictions may not be taken into account in route
calculation. See page 65.
Edit the parameters of the vehicle profile. See page 65.
Optimise the route calculation for different situations and vehicle types
by changing the planning method. See page 67.
Select on-road or off-road navigation. See page 51.
Select your preferred road types for the route. See page 67.
Manoeuvre restrictions and directional constraints are taken into
account when planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only if they are
inevitable to reach the destination.
Walkways are excluded from routes.
All manoeuvres are available in intersections.
One-way streets are taken into account so that driving in the opposite
direction is allowed at low speed.
A private road is used only if the destination is there.
Walkways are excluded from routes.
Function
Description