Setting The Sleep Timer; Setting The Daily On Timer - Sandstrom SHFUSB10 Instruction Manual

Setting the Sleep Timer

Use the sleep timer to turn the system off after a certain number of minutes when in play
mode. By setting the sleep timer, you can fall asleep to music and know that your system
will turn off by itself rather than play all night.
1. Play a CD or tune in to the desired station.
To set the sleep timer press the SLEEP/TIMER button on the remote control
2.
repeatedly, it changes the number of minutes shown on the display in this sequence:
- -
After setting the number of minutes for the sleep timer, the display will return to the
previous display.
The system is now set to turn off after the number of minutes you set. The display will
show "SLEEP".
To confirm the sleep time
When the SLEEP/TIMER button on the remote control is pressed once, the remaining sleep
time is displayed. Wait for a second until the display returns to the original display.
To cancel the sleep timer setting
Press the SLEEP/TIMER button repeatedly on the remote control until the "00" is displayed.
Turning off the system also cancels the sleep timer.

Setting the Daily on Timer

You can use the setting timer to make the unit automatically turn on at a certain time
everyday from standby. When the setting timer is on, the timer indicator "
displayed. The clock must be correctly set for the timer to operate correctly.
1. In standby mode, press the SLEEP/TIMER button on the remote control, SET TIMER will
display and the hour indicator will flash.
Set the hour with the VOL + / – button.
2.
Press the SLEEP/TIMER button on the remote control, minute indicator will flash.
3.
Set the minute with the VOL + / – button.
4.
5. Press the SLEEP/TIMER button on the remote control, the selected time is set. Then set
the daily timer to "ON" (daily timer is active) or "OFF" (daily timer is inactive) by pressing
the VOL + / – button.
6. Press the SLEEP/TIMER button to confirm the setting.
GB-20
...
10 20 80 90 00
" will be