To Change The Fm Reception Mode; Rds (Radio Data System) Reception - Sandstrom SHFUSB10 Instruction Manual

3. Press the PROG button on the remote control to store the station. After 1 second,
the display returns to the broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in the memory with
a preset number.
If the system is unplugged or if a power failure occurs, the preset stations will not be erased.

To change the FM Reception Mode

When you are tuned into a FM stereo broadcast, "ST" will be displayed and you can hear
stereo effects.
If a FM stereo broadcast is hard to receive or noisy, you can select MONO by pressing the
MODE button and the "ST" will not display. Reception will be improved, but you will lose
any stereo effect.

RDS (Radio Data System) Reception

Many FM stations are broadcasting added data compatible with RDS. This radio set offers
convenient functions using such data.
• PS (Program Service Name)
When an RDS station is received, the "RDS" and the name of that station will be displayed.
When the DISPLAY button on the remote control is pressed during PS display, the CT is
displayed for 3 seconds, then PS display returns.
• PTY (Program Type)
Program type identification signal. (Example: News, Rock, Classical music.)
• CT (Clock Time System)
• The CT system may not properly operate in areas where RDS CT service is not available.
Once CT service is received, the CT system keeps operating. "RDS CLOCK" is displayed in
areas where no CT services are available.
• Changing Display
During PS display, press the DISPLAY button on the remote control repeatedly to
select the CT, PTY or Frequency. They will be displayed for 3 seconds, then the PS display
returns.
GB-15