4. Connecting to the Mains Supply
Connect the AC~ socket on the main unit to power plug to the wall outlet with the mains
cable.
• Be sure to unplug the power plug from the wall outlet when going out or when the unit is not in use
for an extended period of time.
• Use the mains cable as the disconnect device. The disconnect device shall remain readily operable.
ECO-Power/Standby Features
Switching ON / OFF
When you first connect the unit to the AC power, the unit will be in standby mode.
•
Press the
display. A countdown of 10 seconds starts for preheating of the system. Then, the
system will switch to the last selected source.
•
Press the
BYE" will show in the display.
Switching the system to ECO Power/Standby mode
Press and hold the
or normal standby.
•
ECO Power standby mode
The clock will not be displayed. Press the CLOCK button to display the clock on the LCD
display (if set).
•
Normal standby mode
The clock (if set) display on the LCD display.
14
standby button to switch the unit on. The word "HELLO" will show in the
standby button to switch the unit back to standby mode. The words "BYE
standby button for 2 seconds or more to switch to ECO Power Standby