Singer SVCT 4020 POWER Instruction Manual page 9

3. Press the lock of dustcup's lower cover.
4. Carry away the dust-glass cap and Spill rubbish.
5. Replace the dust compartment subassembly until it is locked.
2. Cleaning and changing filter or HEPA
- Filter for air-inlet should be cleaned at least twice a year or when it becomes visible
solid.
- Clean HEPA for air-let when you find it is filled in.
- HEPA for air-inlet and filter for air-outlet are changed.
- Always operate the cleaner with filters and HEPA installed.
- Otherwise, reduced suction or motor damage may be result.
- Disconnect from electrical outlet, before cleaning filter.
- Do not use a washing machine to rinse filter.
- Do not use hair drier to dry it.
Cleaning and changing filter and HEPA for air-inlet
1- Take out HEPA assembly.
2. Rinse bracket and HEPA in lukewarm water and dry Filter and HEPA completely.
(HEPA is rinsed by brush.)
ENG
7