Connecter; Data Protocol - Jadever JWA series User Manual

Scale To Printer
Connecter for EZ-2P/BP-443D
Scale To PC
When you want a scale to transmit data to PC continuously.
(1) Using a cable as following to connect Scale and PC
(2) Set printer mode as continue
(3) Scale data will be sent to PC continuously.
l
Output Data when Print Mode set as Continue
( header1: ST=STABLE
( header2: NT=NET
For example : ST /NT□+□12.350□kg
l
Input commands
"T"＝perform TARE function

【Connecter】

Only pin 2,3 and 5 are used.

【Data Protocol】

US=UNSTABLE)
GS=GROSS)
"Z"＝perform ZERO function
Connecter for SH-24
(of course, you must have the receiving software on the PC)
header1 header2 weight unit
(8digits)
JWA WEIGHING SCALE
V02
38