Show / Readjust The Time - Jadever JWA series User Manual

Note
This scale is not installed with RTC so the time setting won't be memorized after switch off.
Please set correct time whenever the scale is switched-on. （unless the scale is using RS-232
with RTC, then there is no such problem, please contact your supplier for RS-232 with RTC）

【Show / Readjust The Time】

(1) Under normal weighing mode press
(2) You can see now what time it is runnig.
Note: you can press
(3) Press
(4) Go into readjusting mode.
PS： One of the digit is being blinking
(5) Press
(6) You also can press
(7) If you want to change the month or year, press
(8) For example, you enter the date display.
(9) For example, you enter the year display.
(10) After all setting is finished, press
(11) Press
Note: before press
you see the displays show as below.
to enter into readjusting mode.
to move rightward
minus 1
or to go to date or year display.
the date/time and return the showing date/time
mode.
to return normal weighing mode
see the month or year.
or to year and date
to plus 1or
to renew
,you can press
JWA WEIGHING SCALE
V02
,then
to
or to
33