Software Problems; Quality Problems - Epson GT-15000 User Manual

Software Problems

EPSON Scan doesn't work properly.
Make sure your system meets the
minimum requirements. See the
requirements on page 67.
Check your computer's memory.
If you're running other software at
the same time, have many device
drivers, or you're scanning a large
image, the computer may not have
enough memory. (See your
software and computer manuals.)
Check your software installation.
Make sure that your software is
correctly installed and set up. If all
else fails, uninstall your software,
then reinstall it.
You can't select ADF as the
Document Source (Office Mode or
Professional Mode).
Make sure the optional automatic
document feeder is installed correctly
and securely connected to the
connector on the back of the scanner.
If you need to reinstall or reconnect it,
restart your computer afterward.
You can't open PaperPort Deluxe.
Restart Windows, then try opening
PaperPort again.
56
Solving Problems

Quality Problems

Your scanned image is faint or out of
focus.
Decrease the brightness setting in
EPSON Scan Office or Home
Mode.
Select Professional Mode and
adjust the exposure using the
Auto Adjust button.
ADF
Select Professional Mode and
adjust the Gamma setting using
the
Check the condition of your
original. If the document is
damaged, dirty, or wrinkled, these
imperfections will show up in your
scan.
Make sure the document is placed
flat against the document table.
Histogram Adjust button.