MOTO GUZZI NORGE GT 8V Service Station Manual page 328

Braking system
•
Insert the pin.
•
Place the split pin.
•
Check the brake fluid level in the res-
ervoir.
Installing
•
Insert two new pads, placing them so
that the holes are aligned with the cal-
liper holes.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY
ARE CORRECTLY POSITIONED INSIDE THE CALLIPER.
•
Insert the pin.
•
Position the split pin.
•
Insert the brake calliper into the disc by
screwing in the two screws.
•
Abut the plungers against the pads,
acting on the brake pump pedal sever-
al times.
•
Check the brake fluid level in the res-
ervoir.
BRAK SYS - 328
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Norge GT 8v