MOTO GUZZI NORGE GT 8V Service Station Manual page 252

Suspensions
•
Insert the sealing washer onto the
wheel axle.
•
Tighten the wheel axle fixing nut to the
specified torque
•
Make sure that the stanchions are
aligned by working with the fork.
• Tighten the terminal screws that lock the wheel
pin to the prescribed torque.
•
Fit the brake callipers tightening the fix-
ing screws to the prescribed torque.
CAUTION
AFTER FITTING THE BRAKE CALLIPERS, OPERATE THE
FRONT BRAKE LEVER SEVERAL TIMES
•
Fit the speed sensor.
•
Tighten the speed sensor screw.
•
Secure the speed sensor cable har-
ness with clamps.
SUSP - 252
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Norge GT 8v