Editing The Connected Ip Cameras - HIKVISION DS-7108HGHI-SH User Manual

Please refer to the Appendix for the list of compatible IP cameras.
Icon Explanation
Edit basic parameters of the camera
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Play the live video of the connected
camera.
Upgrade the connected IP camera.

2.5.7 Editing the Connected IP Cameras

This section is provided for the DS-7300 and DS-8100 models only which support the ONVIF protocol.
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Channel Port: If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the dropdown list.
2. Click OK to save the settings and exit the editing interface.
Digital Video Recorder User Manual
Table 2. 2 Explanation of the icons
Icon
Security
Figure 2. 25 Edit the Parameters
49
Explanation
Add the detected IP camera.
Delete the IP camera
Advanced settings of the camera.
Show the security status of the camera
to be active/inactive or the password
strength (strong/medium/weak/risk)