IBM System x3650 Type 7979 Problem Determination And Service Manual page 162

1. Align the center bracket with the screw holes in the top and bottom of the drive
2. Install the top and bottom screws that hold the center bracket in place.
3. Install the hard disk drive backplane (see "Installing the 3.5-inch-drive hard disk
4. Install the fan-bracket assembly (see "Installing the fan-bracket assembly" on
5. Install the cover (see "Installing the cover" on page 91).
6. Slide the server into the rack.
7. Reconnect the external cables; then, reconnect the power cords and turn on the
144
IBM System x3650 Type 7979 and 1914: Problem Determination and Service Guide
3.5-inch
cage divider
bay area, and push the center bracket into the server.
drive backplane" on page 131).
page 95).
peripheral devices and the server.