Control Panel - GE JEM30WH User And Care

Your Touch Control Mnel
The Touch Control Panel
allows you to set the oven controls
electronically with the touch of a
finger. It's designed to be easy to
use and understand.
1. DISPLAY. Displays time of day,
time counting down during cooking -
functions, power level, internal
food temperature, Auto Roast and _
Auto Defrost codes, Auto Defrost
food weights, cooking mode and
instructions.
2. T~ COOK I & II. Microwave
for a preset amount of time using
automatic power level 10 (High),
(or change power level after entering
cooking time. See page 8.)
3. TIME DEFROST. Gentle
thawing at automatic power level 3
(Low). (If desired, you may change
power level after entering defrosting
time. See page 14. )
4. MIN/SEC TIMER. This
feature uses no microwave energy.
It functions as a kitchen timer, as
a holding period after defrost or
as a delay timer before time or
temperature cooking. (See page 7.)
5. NUMBER PADS. Touch these
pads to enter cooking/defrosting
time, power level, time of day,
finished food temperature, Auto
Roast and Auto Defrost codes and
Auto Defrost food weights.
6. CLOCK. Touch this pad to
enter time of day or check time
of day while microwaving.
To set clock, first touch CLOCK
pad and then enter time of day.
For example, if time is 1:30, touch
number pads 1, 3, and O and "1:30"
will appear in display. Touch
START pad. To reset or change
time, simply repeat above process.
7. CLEAR/OFF. When touched,
it shuts off the oven and erases all
settings (except time of day).
8. AUTO ROAST. Insert probe,
touch this pad, and desired number
pad for Code to slow-cook or
temperature cook meat with
automatic preset program.
(See pages 10 and 11.)
-
Use your Touch Control Panel to
Auto Roast or Auto Defrost with the
oven automatically setting the times
and power levels for you, Temp
Cook/Hold using your choice of
temperature, Time Defrost, Time
Cook and Cook 'N Watch with
choice of power levels from 1
(lowest) to 10 (highest), time
kitchen tasks with the Min/Sec
Timer. and set the clock.
6
9. TEMP COOK/HOLD. Use
the temperature probe to cook by
using a preset temperature. Once
oven reaches preset temperature,
it switches to HOLD setting and
maintains that temperature until
you touch the CLEAR/OFF pad.
(See page 9.)
10. POWER LEVEL. Touch this
pad before entering another power
level number if you want to change
from automatic power level 10
(High) for cooking or power level 3
(Low) for defrosting.
pad for short-term cooking which
automatically turns oven off after
3 minutes. (See page 8.)
enter whole minutes. For example,
for 4 minutes touch 4 and MIN.
made, touch this pad to start oven.
14. AUTO DEFROST. Touch this
pad, then code number and food
weight. The oven automatically
sets power levels and defrosting
time. (See pages 12 and 13. )
"PROBE" Appears
On Display:
Probe has been forgotten when
HOLD function is being used.
Probe is not securely seated
in oven wall receptacle.
Create your own programs to suit
your individual cooking style. For
example: use the Min/Sec Timer to
delay the start of Auto Roast, Temp
Cook/Hold or Time Cook I & II or
program a hold time between Time
Defrost and Time Cook I & II. (See
page 7.) Set Time Cook I &II for a
two-stage program using different
times and power levels. (See page 8.)