Control Panel Assembly; Interior Light - GE JVM1750 Technical Service Manual

To remove the grill assembly (Model JVM1750):
1. Open the door.
2. Remove 2 Phillips-head screws from the top,
front of the oven cabinet.
3. Remove 1 Phillips-head screw from the right,
rear corner of the grill.
4. Slide grill to the left and remove.

Interior Light

The interior light bulb is 120V, 40 watt (part number
WB06X10823).
To remove the interior light:
1. Open the oven door.
2. Remove the 2 Phillips-head screws from the top
of the oven that attach the grill assembly to the
oven and remove the grill assembly.
3. Using a small fl at blade screwdriver, push in the
interior light cover tab and remove the cover.
Grill Assembly
Tab
– 17 –
4. Gently remove the bulb.

Control Panel Assembly

The control panel assembly consists of a smart
board, frame, and a touch pad/escutcheon.
To remove the control panel assembly:
1. Disconnect power to the microwave oven.
2. Open the oven door.
3. Remove the grill assembly. (See
4. Remove the Phillips-head screw that attaches
the control panel to the oven.
(Model JVM1750)
(Model JVM1540)
.)
Grill Assembly
(Continued Next Page)