GE JEM30WH User And Care page 35

PROBLEM
OVEN WILL N~
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL N~ START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
"PROBE" APPEARS
ON DISPLAY
These Things Are Normal
with your Microwave Oven:
Steam or vapor escaping from
around the door.
outer case.
If you need more help.. call, toll free:
The GE Answer Center@
800.626.2000
consumer information service
POSSIBLE CAUSE AND REMEDY
A fuse in your home may be blown or the circuit breaker trippd. Replace fuse or
reset circuit breaker.
. Unplug your microwave oven, then plug it back in.
Make sure 3-prong plug on oven is fully inserted into wdl receptacle.
Door not securely closed.
Make sure you have entered cooking time after touching TIME COOK I & II.
. CLEAR/OFF was touched accidentally. Reset cooking program and touch START.
Make sure you have entered a desired finished temperature after touching TEMP
COOK/HOLD.
Make sure you have entered a code number afier touching AUTO ROAST or
AUTO DEFROST.
. Cooking times may vary because of starting food temperature, food density or
amount of foods in oven. Touch TIME COOK I & II and additional cooking time for
completion.
Incorrect power level entered. Check cooking guide for recommended power level,
or changing levels during cooking if necessary.
Dish was not rotated, turned or stirred. Some dishes require specific instructions,
Check cooking guide or recipe for instructions.
. Too many dishes in oven at same time. Cooking time must be increased when
cooking more than one food item. Check cooking guide time recommendations.
. Probe not inserted properly into meat or dish when using Temp Cook/Hold or Auto
Roast finctions. Check cooking guide for specific instructions.
or Temp Cook/Hold functions.
. Dimming oven light and change
in blower sound may occur while
operating at power levels other
than high.
. Dull thumping sound while oven
is operating.
35
. Some TV-Radio interference
might be noticed while using your
microwave oven. It's similar to the
interference caused by other small
appliances and does not indicate a
problem with your oven.