Enhanced Security Mode; Required Settings - Konica Minolta C652 User Manual

7.10 Security Settings
7.10.5

Enhanced Security Mode

The enhanced security mode cannot be enabled when any of the current functional settings conflict with the
enhanced security mode.
When the enhanced security mode is enabled, the settings required for the mode or the settings that have
been forcibly switched when entering the mode cannot be changed.

Required settings

To enable the enhanced security mode, the following settings must have been configured.
Administrator Settings
User Authentication/Account Track / General Set-
tings / User Authentication
System Connection / OpenAPI Settings / SSL/Port
Settings
Security Settings / Administrator Password
Security Settings / HDD Settings / HDD Lock Pass-
word
Security Settings / Security Details / Prohibited
Functions When Authentication Error / Release
Time Settings
Settings to forcibly changed
When the enhanced security is enabled, the following settings are forced.
- The changed settings will not revert when the enhanced security mode is turned off.
- After the password rules have been changed, any passwords that do not comply with the changed rules
will not be authenticated. For details on the password rules, refer to page 7-45.
- For details on the network settings to be forcibly changed, refer to the "User's Guide [Network
Scan/Fax/Network Fax Operations]".
Administrator Settings
System Settings / Restrict User Access / Restrict
Access to Job Settings / Registering and Changing
Addresses
User Authentication/Account Track / General Set-
tings / Pubic User Access
User Authentication/Account Track / User Authen-
tication Settings / Administrative Settings / User
Name List
User Authentication/Account Track / Print without
Authentication
Security Settings / User Box Administrator Setting
Security Settings / Security Details / Password
Rules
Security Settings / Security Details / Prohibited
Functions When Authentication Error
Security Settings / Security Details / Confidential
Document Access Method
Security Settings / HDD Settings / Overwrite Tem-
porary Data
bizhub C652/C552
Required settings
Select either [ON (External Server)] or [ON (MFP)].
• When you enable account track, select [Ac-
count Name & Password] for the account track
input method.
"SSL Setting" must be displayed.
• "SSL Setting" is displayed when a certificate
has been registered using PageScope Web-
Connection.
Set a password complying with password rules.
Set an HDD lock password.
Set a time of 5 or more minutes.
Required settings
Set to [Restrict].
Set to [Restrict].
Set to [OFF].
Set to [Restrict].
Set to [Restrict].
Set to [Enable].
Set to [Mode 2], and the number of tries is set to 3.
• The number of tries can be changed to 1, 2, or
3.
Set to [Mode 2].
Set to [Mode 1].
• If the setting has been [Mode 2], it is retained.
7
7-47