4.2.4
Boot Setup
4.2.4.1
Boot Configuration
Setup Prompt Timeout
This item is the waiting time of pressing Setup button. If Setup button is not
pressed within the setting time, system will continue to boot.
Bootup NumLock State
This item allows users to active Bootup NumLock State function after the system
is power on to DOS. The default setting is "On".
On: NumLock function is on when system boots.
Off: Cursor control is activated for keypad when system boots.
Quiet Boot
If it is set to "Disabled", BIOS will display normal POST information; If it is set to
"Enabled", BIOS will show OEM icon rather than POST information.
Fast Boot
This item allows BIOS to skip some testing procedures during booting so as to
reduce system boot-up time. The default setting is "Disabled".
ITA-3630 User Manual
Figure 4.22: Boot Setup
38