Helmet Holder; Adjusting The Shock Absorber; Assemblies - Yamaha Star XV250H 2016 Owner's Manual

Instrument and control functions
4
1. Projection
2. Seat holder
2. Place the rider seat in the original
position, and then tighten the
bolts.
TIP
Make sure that the rider seat is proper-
ly secured before riding.

Helmet holder

1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key. WARNING! Never ride with a
helmet attached to the helmet hold-
er, since the helmet may hit objects,
causing loss of control and possibly
an accident.
[EWA10162]
4-9
EAU14283

Adjusting the shock absorber

assemblies

WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
handling and loss of stability may re-
sult.
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring on each shock ab-
sorber assembly in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
sembly in direction (b).
EAU14883
EWA10211
ECA10102