Toshiba GD 1080 Service Handbook page 30

[Operation procedure]
[1] [ ] [Digital key]
[POWER] (Code)
[CANCEL]
* When "CL" is displayed instead of the set number, that indicates that the machine is in the standby
mode.
Initialization codes for the fax
Code Element
100 MAINT Clearing all
101 MAINT Clearing the non-user area
102 MAINT Clearing the image data area
103 MAINT Clearing the system setting area
Note 1: It takes about 20 seconds until the digital keys become operable after the power has been turned ON while
[1] and [ ] are pressed simultaneously.
Note 2: Before performing the initialization, confirm that the destination value is correct in the Setting Mode (08)
described in the chapter 2.3.
If the initialization is performed with the wrong destination setting, the default value of the function mode is
changed to that for the wrong destination.
GD1080/1090 SELF-DIAGNOSIS MODE
[START] [INITIALIZE]
Contents
Initialization
proceeded
After
approx. 10 sec.
Mode Image quality mode
Fax
Fax
Fax
Fax
2 - 32
"CL "
[POWER] OFF
displayed
Default
ALL
ALL
ALL
ALL
October 2000 © TOSHIBA TEC
—
—
—
—