Installing The Combination Oven/Cooktop - Miele H2260E Operating And Installation Instructions

The combination oven/cooktop
must not be operated until it has
been properly installed within
cabinetry.
In order for the combination oven/
cooktop to function correctly, it
required an adequate supply of cool
air. Ensure that the air flow is not
impaired (e.g. insulation in the
cabinetry). Also be sure that the cool
air supply is not heated by other
sources nearby.
Before installation
Before connecting the oven to the
power supply, first disconnect the
power supply from the oven isolator
switch.
Installing the combination oven/
cooktop
Connect the power cord to the
electrical supply.
Align the oven with the front of the
cabinetry.
Connect the cooktop plug to the
socket on the range.
Do not carry the oven by the door
handle. The door can be damaged.
Use the handles on each side of the
range to carry it.

Installing the combination oven/cooktop

It is recommended to remove the door
before installing the appliance (see
"Clean and Care - Removing the
door") and remove the accessories
from the oven cavity. This will make it
easier to install the oven in its niche,
and ensure that you will not use the
door handle to lift it.
Push the oven into the cabinetry and
align it.
Open the door (if it was not removed
previously).
Use the supplied screws to secure
the oven to the side walls of the
cabinetry through the holes in the
trim.
Reinstall the door, if necessary (see
"Cleaning and care - Installing the
door").
79