Quick Start Guide Rp23 - Yeti Cycles ASR C 2012 Owner's Manual

Hide thumbs Also See for ASR C 2012:
Table of Contents

Advertisement

shock setup
04. rebound rp23
The rebound adjustment has 13 clicks of adjustment. The rebound knob is the red adjustment dial located
above your blue pro-pedal adjustment lever. As a general rule, adjustments that are too fast (counter-
clockwise adjustment) will produce a springy ride with excessive kick-up of the rear end causing a bucking
sensation. Adjustments that are too slow (clockwise adjustment) will cause packing of the rear wheel
indicated by a sluggish ride feeling ride.
Slower rebound- turn the knob clockwise
Faster rebound- turn the knob counter-clockwise
quick start guide - rp23
aDjUstment
settinG
AIR SPRIng SETTIng (PSI)
riDer weiGht less 20-30 psi
MEASuRED SAg (MM)
7-11
reBOUnD
*5 CliCks
prO-peDal lever
Open
prO-peDal knOB
pOsitiOn 2-ClimBinG / pOsitiOn 0-DesCenDinG
*all clicks are counted clockwise, rotating from the all the
way out or counter - clockwise dial position.
16.
17.

Advertisement

Table of Contents
loading

Table of Contents