Reverse Gate; Sacrificial Anodes; Body And Hull - Sea-doo Islandia SE Operator's Manual

MAINTENANCE PROCEDURES
Latches, Rails and Hinges
Lubrication
F04L69Y
TYPICAL
1
F14L1GY
CONVENIENCE CENTER STORAGE TRAY
RAILS
1. Rails

Reverse Gate

Reverse Gate Lubrication
Lubricate pivot points and mechanism
on both sides of each gate with XP-S
Lube (P/N 293 600 016) or an equiva-
lent.
______________
94

Sacrificial Anodes

Corrosion of metal parts, especially
those exposed to saltwater, is com-
mon for boats. Corrosion can be
caused by stray electric currents from
shorepower installations, improperly
grounded AC lines and circuits, and
poorly insulated DC powered equip-
ment from boats moored nearby. Cor-
rosion is accelerated when electric
current is present.
Sacrificial anodes are attached to cer-
tain parts of this boat to reduce corro-
sion. The anode corrodes, rather than
the part to which the anode is attached.
Change each anode when 50% by
weight has corroded away.
Anodes are attached at the following
locations:
– Ride shoe(s)/cooling plate(s)
– Pump housing(s)
– Reverse gate support(s)
– Steering nozzle(s)
– Reverse gate(s).
F09L5CY
TYPICAL
1. Sacrificial anodes
NOTE: Inspect anodes each time boat
is to be launched. Do NOT paint an-
odes or apply protective coatings.

Body and Hull

Inspection
Inspect mufflers, battery and reservoir.
1