Bilge Drain Plugs; Jet Pump Nozzle; Reverse Gate - Sea-doo Challenger*180 Operator's Manual

Pull latches to unlock the ladder.
1
F23L0YY
TYPICAL
1. Retractable ladder
2. Latch
Slide ladder toward rear, then push
down.
F23L0ZY
TYPICAL — LADDER LOWERED
To store ladder, lift horizontally, slide
toward front and refasten latch.

45) Bilge Drain Plugs

Once boat is on trailer, unscrew the
drain plugs, block the wheels and raise
the bow slightly with the trailer jack (if
so equipped) so that the water can
flow out of the bilge.
56
2
2
3
F23L05Z
TYPICAL
1. Drain plugs
2. Loosen
3. Tighten

46) Jet Pump Nozzle

The jet pump nozzle provides direc-
tional control when engine is running,
turning side to side via input from the
steering wheel.
WARNING
Never use nozzle as a supporting
point to board the boat or to lift it.
Refer to PROPULSION under PRINCI-
PLE OF OPERATION.

47) Reverse Gate

When selecting the neutral or reverse
position with the shift lever, the re-
verse gate moves up or down to the
desired position.
WARNING
Never use gate as a supporting
point to board the boat. Shift lever
should only be used when the en-
gine is idling and boat is complete-
ly stopped.
1