Evinrude B10R4 Operator's Manual page 43

② L ock the tilt with the Tilt stopper
after the outboard motor has been
tilted up.
Tilt Stopper
③ Manual tilting
If the battery is dead, and the Pow-
er Tilt Switch inoperative, turn the
manual valve to counter-clockwise.
This will allow manual tilting of the
outboard motor.
WARNING
!
Excessive trim up or down may lead
to unstable boat operation, potentially
causing the steering difficulty that
leads to accident during cruising.
● Do not cruise at high speed if im-
proper trim position is suspected.
Stop the boat and readjust trim
angle before continuing cruise.
● For outboard motor model with PTT
switch on the bottom cowl, do not
operate the switch during cruising,
or control of boat may be lost.
Note
Stop the engine before adjusting trim
angle.
POWER
MANUAL
ENGINE OPERATION
43
6