Evinrude B10R4 Operator's Manual page 29

WARNING
!
When opening fuel tank cap, be sure to
follow the procedure described below.
Fuel could blast out through the fuel
tank cap in case the cap is loosened by
using another procedure when internal
pressure of fuel tank is raised by heat
from sources such as engine or sun
light.
Except for USA and Canada model
① Full open the air vent screw on the
tank cap and release internal pres-
sure.
Full open the Air
vent screw
② O pen the fuel tank cap slowly.
③ Fill the fuel carefully not to over
flow.
④ A fter filling the tank, close the tank
cap.
ENGINE OPERATION
For USA and Canada model
① F ull open the air vent screw on the
tank cap and release internal pres-
sure.
Full open
Air vent screw
Tab lock
② L oosen the tank cap until it con-
tacts the tab lock and release
internal pressure completely. After
that, press down the tab lock and
open the tank cap.
③ Fill the fuel carefully not to over
flow.
④ A fter filling the tank, close the tank
cap until two clicks sound is heard.
29
6