Installing The Battery - Evinrude B10R4 Operator's Manual

3. Installing the battery

① Place the battery box in a con-
venient position away from water
spray. Securely fasten both the
box and the battery so they do not
shake loose.
Note
Minimum recommended battery : 12V,
70AH or 12V, 40AH
Specifications and features of batteries
vary among the manufacturers. Consult
the manufacturer for details.
WARNING
!
Battery generates explosive hydrogen
gas. Be sure to:
● Charge the battery in a well-ventilated
place.
● Place the battery away from any
source of fire, sparks and open
flames such as burners or welding
equipment.
● Do not smoke when handling the
battery.
● Do not smoke near the battery when
the battery is charging.
WARNING
!
Battery electrolyte contains sulfuric acid
and thus is hazardous, causing a burn
if it comes in contact with your skin, or
poisonous if swallowed.
KEEP BATTERY AND ELECTROLYTE
AWAY FROM REACH OF CHILDREN
When handling the battery, be sure to:
● Read all warnings shown on the
battery case
● Prevent electrolyte from coming in
contact with any part of your body.
Contact can cause serious burn or,
if it comes in contact with your eye,
loss of sight. Use safety glasses and
rubber gloves.
In case battery electrolyte comes in con-
tact with:
● Skin, flush thoroughly with water.
● Eye, flush thoroughly with water,
and then seek immediate medical
treatment.
In case battery electrolyte is swallowed:
● Seek immediate medical treatment.
21
INSTALLATION
4